Description

• Weberwall blokfix s a non-refractory mortar, used for laying masonry units like AAC blocks. It is a self-curing mortar made from cement, sand, and polymeric additives, which ensure excellent bonding and durable strength between the blocks.
• Always clean the surface before application to remove any loose particles or laitance.
• Ensure that the surface is solid (hard and rigid) for the given application and free from voids, holes, and cracks.
• Pre-wetting of blocks. (Not required for Weber blokset plus).
• Mix powder to water (as per mixing ratio) and blend to a smooth, workable stiff paste.
• Always add the powder to the water.
• Allow the mix to stand for 2-3 min for the paste to mature.
• Do not add water to the already mix slurry to extend the pot life.
• Put well-mixed mortar on the block with the help of a trowel spread mortar uniformly on the unit for the specified bed thickness.
• Firmly place the block with slight shear to ensure proper transfer and bonding.
• mortar to be applied on the block and column and beam for good bonding at the joints.